VHSN-J15
Split system cooling for smaller wine rooms up to 15m³, with the same quiet, vibration-free operation.
View unit
Ductless split system
VHSN-J30 split system wine cellar cooling unit
Split system wine cellar cooling for wine cellars up to 30m³, combining cooling, heating and wet-film humidification for stable, long-term wine storage conditions.
Key features
VHSN-J30 features
- Automatic cooling and heating modes keep the wine cellar at a constant temperature
- Nickel-plated evaporator for corrosion protection
- Circulating-water wet-film humidification system under automatic control — the wet film is made of a Swedish organic polymer material with a sterilisation and disinfection function
- Full touch control system with premium branded sensors for stable quality and performance
- Pull-out wet film module design, easy to replace
- Constant condensation temperature control
- Three-speed airflow under automatic control to maintain the ideal environment for long-term wine storage
- Can be ceiling mounted or rack mounted
Specifications
VHSN-J30 technical specifications
| Cellar size (up to) | 30 m³ |
|---|---|
| Power | 1 hp |
| Power supply | 220 V / 50 Hz |
| Cooling | 1,120 W |
| Heating (electrical) | 4,000 W |
| Air flow | 450 m³/h |
| Static pressure | 30 Pa |
| Noise | 50 dB(A) indoor |
| Refrigerant | R410A |
| Controller | PC full touch smart control |
| Temperature | 10–18°C |
| Humidity | 50–70% |
| Total power | 5,300 W |
| Humidifier | Wet-film |
| Humidification | 2 kg/h |
| Indoor unit size (L×W×H) | 945 × 390 × 300 mm |
| Outdoor unit size (L×W×H) | 860 × 305 × 450 mm |
| Tube connection (liquid) | 6.35 mm |
| Tube connection (gas) | 9.52 mm |
Gallery
.avif)
.avif)
.avif)
.avif)
VHSN-J30 in detail
Common questions
Split system questions
Who should install a split wine cellar cooling system?
Split systems should be installed by a suitably qualified F-gas engineer. Refrigerant pipework, evacuation, charging, pressure testing and commissioning require competent handling.
Where should the condenser be located?
The condenser must reject heat safely and effectively. Location depends on the system type, pipework route, ventilation, noise constraints, access and manufacturer guidance.
Contact the Encool team for technical support.
Do I need an F-Gas registered engineer?
For split systems, yes. Through-the-wall and self-contained units may not require refrigerant pipework on site, but installation should still follow the product manual and good practice.
Is the VHSN-J30 right for your cellar?
Use our calculator for a quick sizing estimate, or talk to our refrigeration engineers about your wine cellar project.