Split system
HSN-J60 split system wine cellar cooling unit
Professional split system wine cellar cooling for spaces up to 60m³, with quiet operation, wet-film humidification and precise temperature control.
Key features
HSN-J60 features
- Automatic cooling and heating modes keep the wine cellar at a constant temperature
- Nickel-plated evaporator for corrosion protection
- Circulating-water wet-film humidification system under automatic control — the wet film is made of a Swedish organic polymer material with a sterilisation and disinfection function
- Full touch control system with premium branded sensors for stable quality and performance
- Pull-out wet film module design, easy to replace
- Constant condensation temperature control
- Three-speed airflow under automatic control to maintain the ideal environment for long-term wine storage
- Can be ceiling mounted or rack mounted
Specifications
HSN-J60 technical specifications
| Cellar size (up to) | 60 m³ |
|---|---|
| Power | 2 hp |
| Power supply | 220 V / 50 Hz |
| Cooling | 3,100 W |
| Heating (electrical) | 6,000 W |
| Air flow | 740 m³/h |
| Static pressure | 30 Pa |
| Noise | 50 dB(A) indoor |
| Refrigerant | R410A |
| Controller | PC full touch smart control |
| Temperature | 10–16°C |
| Humidity | 50–70% |
| Total power | 7,400 W |
| Humidifier | Wet-film |
| Humidification | 2 kg/h |
| Indoor unit size (L×W×H) | 1,345 × 390 × 300 mm |
| Outdoor unit size (L×W×H) | 860 × 305 × 450 mm |
| Tube connection (liquid) | 9.52 mm |
| Tube connection (gas) | 12.7 mm |
Gallery
.avif)
.avif)
.avif)
.avif)
HSN-J60 in detail
Common questions
Split system questions
Who should install a split wine cellar cooling system?
Split systems should be installed by a suitably qualified F-gas engineer. Refrigerant pipework, evacuation, charging, pressure testing and commissioning require competent handling.
Where should the condenser be located?
The condenser must reject heat safely and effectively. Location depends on the system type, pipework route, ventilation, noise constraints, access and manufacturer guidance.
Contact the Encool team for technical support.
Do I need an F-Gas registered engineer?
For split systems, yes. Through-the-wall and self-contained units may not require refrigerant pipework on site, but installation should still follow the product manual and good practice.
Is the HSN-J60 right for your cellar?
Use our calculator for a quick sizing estimate, or talk to our refrigeration engineers about your wine cellar project.